saving . . . saved connection of modem has been deleted. connection of modem has been hidden .
connection of modem
Title
Question
How modem can be connected to computer?

Introduction-to-Computers Getting-to-know-computers 04-05 min 40-50 sec 20-05-20, 3:53 p.m. kishorfarde

Answers:

If it is a modem, then you may need to install the setup/software given along with the device. 
If it is just a router, kindly connect the router and system using the lan cable and enable it using the network settings. 
20-05-20, 4:08 p.m. pravin1389
06-12-21, 3:12 p.m. priya_ponnusamy


Modem Setup:

If it's a modem, you often need to install specific setup software or drivers that come with the device.
Follow the instructions provided in the modem's manual to complete the setup process.
This step usually involves configuring the device to communicate with your Internet Service Provider (ISP).
Router Setup:

If it's a router, connect it to your system (PC or laptop) using a LAN (Ethernet) cable.
Access the router's settings through a web browser by entering the router's IP address (commonly 192.168.1.1 or 192.168.0.1) into the address bar.
Log in using the default credentials provided in the manual (usually "admin" for both username and password).
Enable or configure the network settings (Wi-Fi name, password, etc.) as per your requirements.
21-01-25, 6:47 a.m. Praveen.s65

Login to add comment

If it is a modem ,then you may need to install the setup/software given along with the device.
If it is a router, kindly connect the router and system using the lan cable and enable it using network settings.
19-12-20, 12:20 p.m. dsaraswathi20001@gmail.com
Modem:

Installation may require specific software or a setup process provided with the device.
Follow the instructions in the user manual to ensure the modem connects properly to your ISP.
Router:

Connect the router to your system using a LAN (Ethernet) cable.
Access the router's settings via a browser using its default IP address (e.g., 192.168.1.1).
Enable and configure network settings such as Wi-Fi name (SSID) and password.
This approach covers both devices concisely. Let me know if you'd like to refine it further!












ChatGPT can make mistakes. C
21-01-25, 6:48 a.m. Praveen.s65

Login to add comment

1. Connect the ethernet cable to a yellow LAN port on your modem.
2. Connect the other end of the ethernet cable to an Ethernet port on your computer or laptop.
3.make sure that the Ethernet light is green and flashing next to the port you have used on your modem.
01-07-21, 12:53 p.m. a.a.s.t.h.a

Login to add comment

Plug one end of the ether net cable into the LAN port to modem. plug the other end of the ethernet cable into the computer
01-07-21, 1:52 p.m. Omkar.8080

Login to add comment

Modem can be connected to computer by ethernet cable the one end of ethernet cable is connect to Yellow port of modem or router and other end connect to ethernet port of computer or laptop. 
30-07-21, 6:34 p.m. kishanjee763189@gmail.com

Login to add comment

Modem can be connected to computer by ethernet cable by following ways -
Connect the Ethernet cable to a yellow LAN port on your modem.
Connect the other end of the Ethernet cable to an Ethernet port on your computer or Make sure that the Ethernet light is green and flashing next to the port you have used on your modem.
Open up your browser and confirm that you can load a webpage.
31-10-22, 10:55 p.m. yuvrajguptaji8960@gmail.com

Login to add comment

If it is a modem, then you may need to install the setup/software given along with the device. 
If it is just a router, kindly connect the router and system using the lan cable and enable it using the network settings
03-04-24, 11:26 a.m. kisor_selva

Login to add comment

If it is a modem, then you may need to install the setup/software given along with the device. 
If it is just a router, kindly connect the router and system using the lan cable and enable it using the network settings
03-04-24, 11:35 a.m. naveenkumar27

Login to add comment

The modem can be connected to computer by using internet
09-10-24, 8:11 p.m. Abhiv

Login to add comment

Using an ethernet cable or a wireless connection.
09-10-24, 8:14 p.m. Abhiv

Login to add comment

Using an ethernet cable or a wireless connection.
09-10-24, 8:14 p.m. Abhiv

Login to add comment

Using an ethernet cable or a wireless connection.
09-10-24, 8:14 p.m. Abhiv

Login to add comment

Log-in to answer to this question.