Arduino - Arduino program - error while uploading

saving . . . saved Arduino program - error while uploading has been deleted. Arduino program - error while uploading has been hidden .

Arduino program - error while uploading

Title

Question

Programmer Type : Arduino

Description : Arduino

Hardware Version: 3

Firmware Version: 8.0

An error occurred while uploading the sketch

Vtarget : 0.3 V

Varef : 0.3 V

Oscillator : 28.800 kHz

SCK period : 3.3 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)

avrdude: Expected signature for ATmega328PB is 1E 95 16

Double check chip, or use -F to override this check.

avrdude done. Thank you.

The error message is attached. kindly provide your response to proceed further.

Arduino General None min None sec 23-01-20, 3:59 p.m. PADMARAJK

Answers:

Can you tell us which experiment you are performing? Also, kindly share the entire error message you are getting.

24-01-20, 9:27 a.m. Pratikjb11

Dear Sir,

I am performing the first experiment "Blinking of LED"

I herewith share the entire error message , what i was getting:

Arduino: 1.8.9 (Windows 8.1), Board: "Smartduino Uno\r\n16Mhz, ATMega328PB"

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

C:\\Program Files (x86)\\Arduino\\arduino-builder -dump-prefs\r\n-logger=machine -hardware C:\\Program Files (x86)\\Arduino\\hardware -hardware C:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages\r\n-tools C:\\Program Files (x86)\\Arduino\\tools-builder -tools C:\\Program Files\r\n(x86)\\Arduino\\hardware\\tools\\avr -tools\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages -built-in-libraries\r\nC:\\Program Files (x86)\\Arduino\\libraries -libraries\r\nC:\\Users\\ENGLISH3\\Documents\\Arduino\\libraries\r\n-fqbn=SmartCore:avr:uno16:cpu=atmega328pb -vid-pid=1A86_7523 -ide-version=10809\r\n-build-path C:\\Users\\ENGLISH3\\AppData\\Local\\Temp\\arduino_build_352623\r\n-warnings=none -build-cache\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Temp\\arduino_cache_69860\r\n-prefs=build.warn_data_percentage=75 -verbose\r\nC:\\Users\\ENGLISH3\\Documents\\Arduino\\blinkLED\\blinkLED.ino

\r\n\r\n

C:\\Program Files (x86)\\Arduino\\arduino-builder -compile\r\n-logger=machine -hardware C:\\Program Files (x86)\\Arduino\\hardware -hardware\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages -tools C:\\Program Files\r\n(x86)\\Arduino\\tools-builder -tools C:\\Program Files\r\n(x86)\\Arduino\\hardware\\tools\\avr -tools\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages -built-in-libraries\r\nC:\\Program Files (x86)\\Arduino\\libraries -libraries\r\nC:\\Users\\ENGLISH3\\Documents\\Arduino\\libraries\r\n-fqbn=SmartCore:avr:uno16:cpu=atmega328pb -vid-pid=1A86_7523 -ide-version=10809\r\n-build-path C:\\Users\\ENGLISH3\\AppData\\Local\\Temp\\arduino_build_352623\r\n-warnings=none -build-cache\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Temp\\arduino_cache_69860\r\n-prefs=build.warn_data_percentage=75 -verbose\r\nC:\\Users\\ENGLISH3\\Documents\\Arduino\\blinkLED\\blinkLED.ino

\r\n\r\n

Using board 'uno16' from platform in folder: C:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages\\SmartCore\\hardware\\avr\\1.0.0

\r\n\r\n

Using core 'MiniCore_corefiles' from platform in folder:\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages\\SmartCore\\hardware\\avr\\1.0.0

\r\n\r\n

Detecting libraries used...

\r\n\r\n

"C:\\\\Program Files (x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-g++"\r\n-c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections\r\n-fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega328pb -DF_CPU=16000000L\r\n-DARDUINO=10809 -DARDUINO_AVR_ATmega328 -DARDUINO_ARCH_AVR -Wextra -flto -g\r\n"-IC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Arduino15\\\\packages\\\\SmartCore\\\\hardware\\\\avr\\\\1.0.0\\\\cores\\\\MiniCore_corefiles"\r\n"-IC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Arduino15\\\\packages\\\\SmartCore\\\\hardware\\\\avr\\\\1.0.0\\\\variants\\\\pb-variant"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\sketch\\\\blinkLED.ino.cpp"\r\n-o nul

\r\n\r\n

Generating function prototypes...

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-g++" -c -g -Os -w\r\n-std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections\r\n-fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega328pb -DF_CPU=16000000L\r\n-DARDUINO=10809 -DARDUINO_AVR_ATmega328 -DARDUINO_ARCH_AVR -Wextra -flto -g\r\n"-IC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Arduino15\\\\packages\\\\SmartCore\\\\hardware\\\\avr\\\\1.0.0\\\\cores\\\\MiniCore_corefiles"\r\n"-IC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Arduino15\\\\packages\\\\SmartCore\\\\hardware\\\\avr\\\\1.0.0\\\\variants\\\\pb-variant"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\sketch\\\\blinkLED.ino.cpp"\r\n-o\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\preproc\\\\ctags_target_for_gcc_minus_e.cpp"

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\tools-builder\\\\ctags\\\\5.8-arduino11/ctags" -u\r\n--language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\preproc\\\\ctags_target_for_gcc_minus_e.cpp"

\r\n\r\n

Compiling sketch...

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-g++" -c -g -Os -w\r\n-std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections\r\n-fno-threadsafe-statics -MMD -mmcu=atmega328pb -DF_CPU=16000000L\r\n-DARDUINO=10809 -DARDUINO_AVR_ATmega328 -DARDUINO_ARCH_AVR -Wextra -flto -g\r\n"-IC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Arduino15\\\\packages\\\\SmartCore\\\\hardware\\\\avr\\\\1.0.0\\\\cores\\\\MiniCore_corefiles"\r\n"-IC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Arduino15\\\\packages\\\\SmartCore\\\\hardware\\\\avr\\\\1.0.0\\\\variants\\\\pb-variant"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\sketch\\\\blinkLED.ino.cpp"\r\n-o "C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\sketch\\\\blinkLED.ino.cpp.o"

\r\n\r\n

Compiling libraries...

\r\n\r\n

Compiling core...

\r\n\r\n

Using precompiled core:\r\nC:\\Users\\ENGLISH3\\AppData\\Local\\Temp\\arduino_cache_69860\\core\\core_SmartCore_avr_uno16_cpu_atmega328pb_19e61a0f813bf498fae762295d325732.a

\r\n\r\n

Linking everything together...

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-gcc" -w -Os -Wl,--gc-sections\r\n-mmcu=atmega328pb -w -flto -g -o\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/blinkLED.ino.elf"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623\\\\sketch\\\\blinkLED.ino.cpp.o"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/..\\\\arduino_cache_69860\\\\core\\\\core_SmartCore_avr_uno16_cpu_atmega328pb_19e61a0f813bf498fae762295d325732.a"\r\n"-LC:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623"\r\n-lm

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-objcopy" -O ihex -j .eeprom\r\n--set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma\r\n.eeprom=0\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/blinkLED.ino.elf"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/blinkLED.ino.eep"

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-objcopy" -O ihex -R .eeprom\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/blinkLED.ino.elf"\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/blinkLED.ino.hex"

\r\n\r\n

"C:\\\\Program Files\r\n(x86)\\\\Arduino\\\\hardware\\\\tools\\\\avr/bin/avr-size" -A\r\n"C:\\\\Users\\\\ENGLISH3\\\\AppData\\\\Local\\\\Temp\\\\arduino_build_352623/blinkLED.ino.elf"

\r\n\r\n

Sketch uses 960 bytes (2%) of program storage space. Maximum\r\nis 32256 bytes.

\r\n\r\n

Global variables use 9 bytes (0%) of dynamic memory, leaving\r\n2039 bytes for local variables. Maximum is 2048 bytes.

\r\n\r\n

C:\\Program Files\r\n(x86)\\Arduino\\hardware\\tools\\avr/bin/avrdude\r\n-CC:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages\\SmartCore\\hardware\\avr\\1.0.0/avrdude.conf\r\n-v -patmega328pb -carduino -PCOM3 -b115200 -D -Uflash:w:C:\\Users\\ENGLISH3\\AppData\\Local\\Temp\\arduino_build_352623/blinkLED.ino.hex:i\r\n

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

avrdude: Version 6.3-20171130

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

System wide\r\nconfiguration file is\r\n"C:\\Users\\ENGLISH3\\AppData\\Local\\Arduino15\\packages\\SmartCore\\hardware\\avr\\1.0.0/avrdude.conf"

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

Using\r\nPort : COM3

\r\n\r\n

Using\r\nProgrammer : arduino

\r\n\r\n

Overriding Baud\r\nRate : 115200

\r\n\r\n

AVR Part : ATmega328PB

\r\n\r\n

Chip Erase\r\ndelay : 9000 us

\r\n\r\n

PAGEL : PD7

\r\n\r\n

BS2 : PC2

\r\n\r\n

RESET\r\ndisposition : dedicated

\r\n\r\n

RETRY\r\npulse : SCK

\r\n\r\n

serial\r\nprogram mode : yes

\r\n\r\n

parallel\r\nprogram mode : yes

\r\n\r\n

Timeout : 200

\r\n\r\n

\r\nStabDelay :\r\n100

\r\n\r\n

CmdexeDelay : 25

\r\n\r\n

\r\nSyncLoops : 32

\r\n\r\n

\r\nByteDelay : 0

\r\n\r\n

\r\nPollIndex : 3

\r\n\r\n

\r\nPollValue :\r\n0x53

\r\n\r\n

Memory\r\nDetail :

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

Block Poll Page Polled

\r\n\r\n

Memory Type\r\nMode Delay Size Indx Paged Size \r\nSize #Pages MinW MaxW ReadBack

\r\n\r\n

-----------\r\n---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

\r\n\r\n

eeprom 65 \r\n20 4 0 no \r\n1024 4 0 \r\n3600 3600 0xff 0xff

\r\n\r\n

flash 65 \r\n6 128 0 yes \r\n32768 128 256 An error occurred while uploading the\r\nsketch

\r\n\r\n

4500 4500 0xff 0xff

\r\n\r\n

lfuse 0 \r\n0 0 0 no 1 \r\n0 0 4500 \r\n4500 0x00 0x00

\r\n\r\n

hfuse 0 \r\n0 0 0 no 1 \r\n0 0 4500 \r\n4500 0x00 0x00

\r\n\r\n

lock 0 \r\n0 0 0 no 1 \r\n0 0 4500 \r\n4500 0x00 0x00

\r\n\r\n

\r\ncalibration 0 0 \r\n0 0 no 1 \r\n0 0 0 \r\n0 0x00 0x00

\r\n\r\n

\r\nsignature 0 0 \r\n0 0 no 3 \r\n0 0 0 \r\n0 0x00 0x00

\r\n\r\n

efuse 0 \r\n0 0 0 no 1 0 \r\n0 4500 4500 0x00 0x00

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

Programmer\r\nType : Arduino

\r\n\r\n

\r\nDescription : Arduino

\r\n\r\n

Hardware\r\nVersion: 3

\r\n\r\n

Firmware\r\nVersion: 8.0

\r\n\r\n

Vtarget : 0.3 V

\r\n\r\n

Varef : 0.3 V

\r\n\r\n

\r\nOscillator : 28.800 kHz

\r\n\r\n

SCK\r\nperiod : 3.3 us

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

avrdude: AVR device initialized and ready to accept\r\ninstructions

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

Reading | ##################################################\r\n| 100% 0.00s

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

avrdude: Device signature = 0x1e950f (probably m328p)

\r\n\r\n

avrdude: Expected signature for ATmega328PB is 1E 95 16

\r\n\r\n

Double check\r\nchip, or use -F to override this check.

\r\n\r\n

<o:p> </o:p>

\r\n\r\n

avrdude done. Thank\r\nyou.

27-01-20, 9:58 a.m. PADMARAJK

Select Arduino/Genuino Uno board from Tools => Board.

And then upload the program again.

28-01-20, 9:53 a.m. Pratikjb11

Title

Question

Answers:

Log-in to answer to this question.