These are the similar questions in: Ask a new question.
User | ||||||||
|---|---|---|---|---|---|---|---|---|
| Oscad | Schematic-C… | None | None | problem with subcircuit builder | 03-04-14 | 1068 | 1 | A.Saikanth |
| Oscad | Schematic-C… | 08-09 | 20-30 | Error when converting spice to ngspice | 02-04-14 | 1201 | 12 | Jmannings… |
| Oscad | Schematic-C… | None | None | Cannot run analysis inserter | 01-04-14 | 1162 | 6 | Jmannings… |
| Oscad | Schematic-C… | 05-06 | 30-40 | Oscad Schematic | 26-03-14 | 1085 | 2 | RAHUL SRI… |
| Oscad | Schematic-C… | 00-01 | 40-50 | dc voltage/current through resistor | 17-03-14 | 1052 | 1 | rakhiwarr… |
| Oscad | Schematic-C… | 01-02 | None | SMCSIM | 17-03-14 | 1161 | 1 | rakhiwarr… |
| Oscad | Schematic-C… | None | None | error opening schematic editor | 13-03-14 | 1116 | 3 | swethakan… |
| Oscad | Schematic-C… | 01-02 | 0-10 | Error opening eeschema Editor Schematic… | 27-02-14 | 1807 | 3 | sourcex |
| Oscad | Schematic-C… | 00-01 | None | how to set values forTransformers in os… | 13-02-14 | 1450 | 1 | vijaythil… |
